Description
Two ways to put light through a board. One set is frosted PC, so the backlight bleeds through the whole cap; the other is doubleshot ABS, where the cap stays solid and only the legends glow. Both are replacement keycaps — no keyboard, no switches.
Choose by profile
The height matters more than the colour
The 11-key set is MDA: taller than OEM, with a rounder dish and a more stepped row. It changes how the board feels, not just how it looks.
The 21-key set is OEM, the height most mechanical boards ship with. It lines up with the caps already on your board instead of standing proud of them.
So: OEM if you want the set to disappear into the rest of the board, MDA if you want a taller, older-school top row under your fingers.
Material
Frosted PC versus doubleshot ABS
PC is translucent, and the 11-key set is frosted rather than glass-clear — it scatters the backlight instead of showing the switch underneath, which reads softer and hides dust better. Because you can see into it, the colour of your switches will tint what you see.
ABS is opaque. The 21-key set gets its colour from doubleshot moulding: two shots of plastic, legend and body, so the legend is part of the cap rather than ink sitting on top of it. It will not rub off, and it does not fade the way printed or pad-printed legends do.
Artwork
Two themes, one plain
The 11-key sets carry artwork instead of letters: an astronaut on the shift, an orbit trail along the spacebar, a ringed planet, a comet. Amber runs the space theme; deep blue runs the ocean theme, with a whale along the spacebar and a jellyfish on the tall cap.
The 21-key sets are the opposite: no artwork, just clean shine-through legends on every key, including the number row and the numpad enter.
In the set
What is actually in the box
| 11-key set | Shift, Backspace, spacebar, the four arrows, a plus key and three artwork caps (planet, saturn, rocket) |
| 21-key set | Esc, F5–F8, Backspace, Num, Tab, backslash / pipe, Caps Lock, Enter, Shift ×2, Ctrl ×2, spacebar, four arrows, numpad Enter |
Compatibility
Will it fit
| Mechanical boards with an MX cross stem | Yes — 1U caps and standard modifiers |
| 60% / 65% / TKL / full-size | Yes, on the keys listed above |
| Low-profile boards | No — both sets are full height |
| Boards with a 7U or split spacebar | Check your spacebar length before ordering |
Specifications
Specifications
Before you order
Before you order
- The keyboard and switches in the photographs are not included. These are keycaps only.
- The 11-key and 21-key sets are two different products, not a bundle you can mix.
- The supplier lists the 21-key colours as blue and orange; the blue reads as a soft violet in daylight, which is what the photos show.
- Swapping caps needs a puller — no glue, no soldering.
One complete set per order. Check the profile before buying: MDA and OEM sit at different heights.
Reviews
There are no reviews yet.